Description:
– Power the HamGeek HMG-01 Plus using USB-C Type or PoE 802.3af
– Zigbee over LAN, USB and WiFi is supported
– Main chips used are ESP32, LAN8720 and CH340C
– CC2652P2 for TI with +20db amplifier incorporated. NEW CC2652P7 is used in hardware revision v0.2+
– CC2652P7 for TI is used in all new hardware starting from v0.2+. Support of up to 300 Zigbee Devices
– It supports both Coordinator and Router modes
– 3 LEDs on HamGeek HMG-01 Plus enable user feedback and alerts. BLUE: Power Indication. RED: Working Mode USB/LABLUE. YELLOW: Z2M Connection
– DIY Pinouts are available
– Change working modes with just a button press. Single Press: Change between USB/LAN Mode. Hold (2-4 sec): Control LED’s ON/OFF. Hold (4-8 sec): Activate Flashing Mode. Hold (10+ sec) on power up will RESET device
– Update ESP32 & CC2652P firmware over LAN/Internet/USB
– Security authentification
– Open Source Firmware
– Compact shape: 73x72x27mm
– Plug & Play, comes pre-flashed
Getting Started:
HamGeek HMG-01 Plus is functioning as a Zigbee adapter, facilitating the transmission of Zigbee packets over Ethernet, WiFi, or Serial (USB) connections. The Zigbee adapter permits the integration of devices from various manufacturers (here is a list of supported devices for reference: https://www.zigbee2mqtt.io/supported-devices/) into a unified system. To effectively utilize the HMG-01 Plus, it is essential to possess both a Home Assistant instance and ZigBee2Mqtt.
Package Included:
– 1 x HMG-01 Plus Zigbee Ethernet POE USB WiFi Adapter
– 1 x 3dB Antenna
Powering the device:
– The device can be powered either via Power over Ethernet (PoE) using an Ethernet cable or through a Type-C plug.
– Tip: HMG-01 Plus has optoelectronic isolation, so can be connected to USB port of your PC and at the same time to Ethernet/PoE cable!
Reviews
There are no reviews yet.